Recommended Products
Vertical GPU mounting Bracket
* This design does NOT require any modifications that would damage your case.
* This is only compatible with Full Tower and Mid Tower cases with 6 PCI slots or higher, so compatibility is buyer’s responsibility.
* It requires 6 screws on the side and 4 at the back of the case to firmly secure the mount in place.
Shop
Showing 1–24 of 87 results
-
Load Shedding
12V Router & WiFi UPS (2 Outputs)
With load shedding kicking into full gear again, keep your internet and WiFi running during outages, even with 2 load shedding periods
Unlike other router/wifi UPS out there, ours are South African made (local is lekker), we use quality Samsung batteries and not high cap fake batteries that can be a fire hazard and our device has 2 ports allowing you to plug in your fiber CPE and your WiFi router at the same time (or any 12V appliance). Remember if you buy cheap Chinese UPS it will mean your capacity will be fake and your charge cycles (thus lifespan of the device) will be less. We use quality batteries that will give you more than 1000 cycles!
We’ve tested a Vumatel CPE/Raycore + Hauwei Wifi router and got over 5 hours run time.
The product is in a really neat small form factor 3D printed in black. Each unit is produced, assembled and tested before sending out.
HOW DOES IT WORK?
The provided plug gets plugged into the wall to charge the UPS, if the power goes out your devices keep running. The connected devices are connected using the provided male to male extensions. So in essence, you won’t use your router, WiFi or 12v appliance’s plug but instead use the included wires to connect them to the UPS. This UPS supports 2 connections thus no need to buy 2 UPS like other brands.
Important: The ports are 5.5×2.1mm – this is most widely used for routers and fiber boxes! You can buy adapters if needed.
SKU: UPS12VX2 -
-
3D Printing Service
3D Printing Instant Quote
We’ve been working hard on getting an instant quote solution to customers, so that you can check pricing and buy instantly based off of those quotation instead of contacting us first and having to wait for pricing.
We charge a setup fee of R99 (lower than our competitors), this cost is for setting up your job and potential wastage from fail prints or reprints after setting adjustments to get your prints perfect.
Simply upload your designs and our system will analyze it and calculate the pricing for your parts.
We currently offer White or Black colors in PLA/ABS. Please make sure you select the color before adding to cart.
You can find STL files (3D models) on sites like Thingiverse, MyMiniFactory, Cults3D, etc. These files can all be quoted on once you upload them here.
NEW! Multiple Items to get quoted on? Use the bulk uploader.
SKU: n/a -
Audio & Sound Things
Cat Ears for Headphones
2 Hairbands with diameter around 40mm are needed.
Attachment system inspired by Kitty Ears for Razer Kraken.
Probably would suit better an Over-ear Headphones, because of how huge those ears are.
Assembly:
-Attach the adapter to your headphones with Hairband
-Slide the Ear in place.(Also try ro connect those two pieces before asssembly, because the fit might be too tight)You can also paint the inner ear white or black with acryl paint to give it a cool depth look – you may request for us to paint it (send a whatsapp)
SKU: 4902249 -
COVID-19 Essentials
Corona SaniBox Customized with your Name
This SHAP3D SaniBox includes a 50ml 70% Alcohol Sanitizer spray and a cloth mask. The box is a grab-and-go solution for travelers or spouses that want to keep an extra set of sanitizers and masks in the car, and know who’s mask is who’s. All the contents is made proudly South African. The box will be customized with your name, PLEASE leave your name in the order comments.
The actual size of the box is: 13cm x 73cm x 40cm – it’s very compact and will fit in your bag, briefcase, luggage, glove compartment or drawer.
- Please note sanitizer may vary depending on availability. But it will be a 70% alcohol sanitizer nonetheless.
SKU: SANIBOX-BLK -
-
-
-
COVID-19 Essentials
EZ Face Mask
The Goal of this mask is to make a low poly respirator that is stupid simple operate and that uses a readily available/incredibly cheap filter mechanism requiring no cutting of material. (in this case makeup pads). The cotton pads, from research seems to block about 75% – I add 2x on my (Large) face mask without any need for cutting of the pad. So I receive extra filtration.
We’ll include a elastic type filament strand as the holder of your mask to your head. Which is like a string and so far seems to work fine.
SKU: culmsk -
COVID-19 Essentials
EZ Face Shield
This is a quick and easy DIY face shield. Simply clip the clear sheet onto the headband and stretch the elastic into the slits at the back if you need it to grip your head. Everything you need is included in the kit!
If you want to cut the sheet at the bottom to round the corners you can. This product should be used in conjunction with a face mask or with our EZ Face Mask for maximum protection.
SKU: n/a